Autowatch Ghost Immobiliser
The well-known Ghost Immobiliser provides your vehicle with a high level of protection against key cloning as well as theft, hacking and hacking. This TASSA-verified system is undetectable by thieves and stops your vehicle from starting.
This silent device uses buttons located on the steering wheel, centre console, and door panels of your vehicle. It allows you to create a unique PIN code up to 20 characters that must be entered before the car starts.
Easy to install
It is more essential than ever that you protect your vehicle. With car thefts on the rise and cloning tools readily available, it's essential to do so. Our Autowatch Ghost immobiliser provides a discrete, effective and aftermarket solution for protecting against key-cloning and car theft. The unit is virtually invisible to thieves and operates via buttons on the steering wheel or door panels. This allows customers to create an individual disarm sequence similar to that of credit cards, which have to be completed before the vehicle can begin or be driven away. This makes it almost impossible to detect and is not affected by jamming devices or spoofing devices, like other systems.
The installation of the Ghost unit is a highly skilled procedure that should only be carried out by an approved installer. The unit is carefully integrated into the CAN bus network of your vehicle, ensuring that it communicates directly with the ECU. This allows the Ghost to be installed without changing factory settings and ensures that it cannot be bypassed by a thief using signal boosters or other techniques.
Once the Ghost is installed, a new and improved disarm sequence must be entered to turn on your vehicle. Press the service button 5 times in a matter of 2 seconds, but make sure you don't hold it down for too long. The system will flash twice to indicate that Transport Mode is active. This feature is great for classic, sports & luxury vehicles that have to have their security system temporarily disabled while transporting or servicing.
After Transport Mode has been activated the immobiliser is turned off and cannot be reactivated by entering your PIN code again. This feature is perfect for those who would like to store their vehicles during the winter months to keep theft or to avoid having to pay higher insurance rates.
There are no keyfobs or LEDs, or other indicators to help you locate it.
The Ghost immobiliser protects your car from theft by pressing buttons on the dashboard or steering wheel. You can enter a pin code without being noticed prior to starting the engine. It can be connected to an application on your phone to arm or disarm remotely. It prevents signal relay, ECU swapping, and key cloning. It is easy to install and can be put in a range of vehicles. It's also extremely stealthy, and can be hidden in a hard-to-reach place like behind the dashboard or within the trim of the steering wheel.
This is a fantastic option for vehicles that are high-performance because it can disable your vehicle's ignition in the event that the wrong pin code has been entered. This prevents thieves from driving away with your joy and pride. The device will even send an alert to your mobile when you've left the vehicle unattended in public, giving you peace of mind when you're away from your car.
The Ghost is unique to other immobilisers in that it doesn't require any additional fobs or LED indicators. It can also be easily hidden in a difficult-to-reach area of your vehicle. It is highly resistant to detection since it directly communicates with the CAN data network of your vehicle. It also doesn't emit radio signals, making it not detected by RF scanners, or signal jammers.
It's designed to be tamper-proof and weatherproof, and can endure extreme temperatures. It is also difficult to tamper by cutting the wires, or dismantling it. Additionally, it doesn't need any circuit cuts to work and is therefore inaccessible to organised thief gangs that employ diagnostics reading devices to detect the security systems fitted to. It's also not affected by the professional auto diagnostics equipment which checks the CAN data system for the presence of a security device.
No circuit cuts
With no LED indications or key fobs that can reveal its location, the ghost device is hidden within your car, under the dashboard or on the steering wheel and uses buttons in your car to create an individual PIN code sequence which must be entered before the engine can be started. This means that even if the criminal does have your keys they can't drive the car away as they would not know the correct PIN code sequence. The device does not transmit any radio signals, meaning that organized thief gangs using diagnostics reading devices won't be able to recognize the device.
This innovative immobiliser is TASSA approved and can reduce the cost of insurance, particularly for vehicles that have been customized by their owners. It also helps prevent key theft and ECU switching, meaning that the only possible way for a thief to steal your pride and happiness is to tow it.
The system is completely quiet as it does not use the factory keys or dashboard buttons. It communicates with the ECU via the CAN data circuit, which is completely silent and does not give any indication that it's been installed. This means that a burglar would not be able to add new key fobs or even replace the ECU in order to cause your vehicle to start. This eliminates any other theft methods that have been used in recent years, such as key cloning, RFID scanning, and code grabbing.
If you ever forget your PIN code, our engineers have provided you with an emergency reset option for the device which allows you to enter'service mode'. This allows the dealer or technician to temporarily start and drive your vehicle which allows them to complete maintenance work, MOTs, or valet parking without entering the PIN code a second time. Once the technician has finished their work or you have removed your vehicle, simply enter the PIN code and the device will exit service mode based on speed and time.
No radio signals
The Ghost immobiliser, unlike other security systems for cars, does not rely on alarm systems or keyfobs to prevent vehicles from beginning. It communicates instead with the vehicle's ECU, the CAN data circuit, and other circuits to prevent the engine starting. This makes it a discrete solution that isn't affected by key cloning techniques or RF scanning techniques employed by thieves to circumvent other security devices. It can be paired with tracking devices to increase the safety of your vehicle. You will also be alerted when there is a chance to steal or alter the security of your vehicle.
The Autowatch Ghost, a TASSA certified device, is insurance approved and offers an excellent level of protection against key hacking and the cloning. It utilizes a mobile app to control the device. It is encrypted to ensure security. what is ghost immobiliser has a safe emergency PIN override. It is an effective, discreet and cost-effective way to shield your car from theft.
However the Ghost is not without its difficulties. Users frequently have difficulty completing the correct sequence of disarming. The device requires input from buttons already in your vehicle such as the ones on the steering column or on the centre console. Some people may find it difficult to remember or get wrong especially when the device is being first used. It is advisable to read the manual that comes with the device to understand this and practice the process of disarming prior to driving the vehicle.
Another issue is that some vehicles have problems with the CAN data connection, which can affect the performance of the Ghost. This can be caused by defective sensors or a damaged OBD port. It is best to have the system tested again before using it in the event of any issues with the connection to CAN.
Change the PIN code with ease
The Ghost is a fantastic product that has enjoyed a great reception on the market. However changing the pin code can be a bit confusing. The device is pre-programmed via the installer when it's installed however, there are times when customers may prefer to change their pin code for different reasons such as they'd like to use a different button to deactivate the device or they don't want their installer to know or they just simply don't like the pin number they have currently. The good news is the switch to a new pin number is extremely simple. Follow these easy steps to find out how.
Please note that you will need to switch on the ignition of your vehicle but DO NOT start the engine! The process takes only just a few seconds to be completed. The vehicle will then return to normal operation.